This is with the light off (notice the rocker switch on the right by the three knobs). I spliced in some wires to an LED puck light and put in a rocker switch. The light is mounted inside the cabinet with screws, but I can twist the cap off to change batteries if needed.

The light is on! What is an oven without a light!

There is also a very small drawer (like the oven we have at home) under the oven door.

The carcass made of BC 3/4 ply that I had laying around in the basement. The black rack is a cooling tray for cookies. (made a mistake in the dado of one of the boards, that I ended up fixing).    

The face frame (also scrap wood) clamped on. Not my best work as I didnt really think everything through, but good enough for a first go around.    

Doors (the one with white on it is the oven door. I covered the plexiglass with paper while painting.    

First coat! The white side will end being painted with Chalkboard paint so one can draw on the side of the cabinet!

View from the other side

Added a shelf for storage