Tall End Tables
We needed a place to put our beers while playing with the pinball and arcade machine. So I designed these fairly simple tables (I made two), to slide in between the machines. It's solid walnut, and I had a little fun with a Maloof inspired joint between the top and the legs.
Leg joint was routed out using a slot cutter stack on the router table. The inner and outer corners were shaped using a 1/2" round over bit.
Jig for routing out the table side of the Maloof joint.
All other edges got eased using a 1/8" roundover bit.
The bottom shelf is my first attempt at resawing and book matching.
The second table isn't yet finished, but will go to the right.
Very nice i have been thinking of making a Maloof inspired chair. Quite a challenge to be sure.