I was aiming for platters, not quite there yet.
The three bowl and / or platters I got from the cut of maple in the next pic.
About 3 foot tall. I posted this, and the first bowl, in my last project. The repeat here is because these are the 3 final pieces I got out of this wood.
My golf ball holder. I think it would still hold a golf ball without the expended sides. Probably...
This is the flattest piece I made, and the closest to what I was initially aiming for. It's about 1/4 inch thick, I think I can shave that down a little more in my next try.